Wave Wireless Networking SPEEDLAN TM 6000, Руководство оператора

Страница: 45 / 50

SPEEDLAN TM
45
Enabling the DHCP Server on the SPEEDLAN TM
To enable the DHCP Server on the SPEEDLAN TM, do the following:
1. From the Setup menu, choose General Setup . The General Setup dialog box appears.
2. Select the Enable DHCP Server check box; this will enable you to set up the DHCP Server.
Note: The only active NAT / DHCP check boxes in the NAPT / DHCP Features section (in the
dialog box above) are the following:
•
Enable Outgoing Network Address Translation - This feature enables a company to map
the private networks IP addresses into one or more global public network IP addresses. This
means that outsiders will only view the single (or more if designated) IP network address
assigned for global viewing on the Internet. For more information, see
Part III - Setting Up
NAT , page 61 .
•
Enable Incoming Network Address Translation - This feature enables a company to unmap
public network IP address into private network IP addresses. For more information, see
Part III - Setting Up NAT, page 61 .
3. From the Setup menu, choose DHCP Server Setup . The DHCP Server Setup dialog box
appears (as shown on the next page).