Wave Wireless Networking SC5800, Руководство пользователя, Страница: 47 / 108

SPEEDCOM SC5800 User Manual
45
6.4.1.4 Remote User Configuration
This applies to the same directions above (that is, Section 6.3.1.3, Local User
Configuration , page 44) but controls access to the remote station’s MIB.
6.4.2 Main Screen Short-cut Buttons
Short-cut buttons are provided to allow quick access to the above menu items.
6.5 Indoor Unit Configuration
The Indoor Units have graphical interface controls that allow you to configure the
following items:
•
Payload Data Interface Port
•
Service Channel Port
•
‘Loopback to Line’ and ‘loopback to RF Link’
•
Opto Inputs
•
Relays
Payload is from the user’s ‘line’ equipment to the Indoor Unit Payload Data DB25
connector and RF Link is from Antenna to Antenna.
Right-click on the Indoor Unit to get the following options
•
Time/date entry
•
Station Status
•
Station Properties
•
Station Info (Serial number, software version, bootkernel version)
•
View Event Log
•
Maintenance
6.5.1 Controls
6.5.1.1 Payload Data Interface Port
A label/name can be assigned to any of the payloads.
6.5.1.1.1 E1 Port Line Code
Default setting is HDB3 . However, it can be set to either HDB3 or AMI .