Wave Wireless Networking SC5800, Руководство пользователя, Страница: 26 / 108

SPEEDCOM SC5800 User Manual
24
4.1 Customer Furnished Tools and Equipment
The following table lists tools and equipment required to install the SC5800 system.
General, IU-to-OU Interconnect
•
Cable cutting and stripping tools.
•
Earth lug crimp tools.
•
3 mm flat screwdriver - IU to OU power cable.
•
RJ45 crimp tool - IU to OU data cable.
•
Earth cable or strap rated at 45A with 5 mm earth lug earthing the Indoor and
Outdoor Units.
•
Cable ties, used to secure the cables to the mast at regular intervals.
IU
•
Pozi #2 screwdriver - IU mounting in a 19" rack and the earth lug.
•
2.5mm Allen key - To change the position of the IU mounting brackets.
•
DC power supply cable: minimum 2.5 mm square conductor, rated for 10 A. For
connection between the power supply and the Indoor Unit DC connector on the
rear panel.
•
IU earth lug: 10-4 (10 square mm for wire and hole big enough for M4 thread)
OU
•
13 mm spanner (or Wrench) – used for attachment of OU to mounting bracket.
•
13 mm spanner - used for attachment of OU mounting bracket to pole.
•
2.5 mm Allen key - used to tighten OU connection box cover fasteners.
•
OU earth lug: 10-8 (10 square mm for wire and hole big enough for M8 thread)
For details on the data and RF cables, which are also customer furnished
equipment, see Section 7,
Maintenance Information , page 57.