User Manual
57
Warning
:
Before assembling the DC connector, ensure the cable polarity is correct.
4.8.2 Assembling the PV connector
1) Peel off the DC cable insulation sleeve for 7 mm.
7mm
2) Disassemble the connector in the accessory bag.
+
-
3) Insert the DC cable through the DC connector nut into the metal terminal and press the terminal with a professional
crimping plier (pull back the cable with some power to check if the terminal is well connected to the cable).
4) Insert the positive and negative cables into the corresponding positive and negative connectors, and pull back the
DC cable to ensure that the terminal is tightly attached to the connector.
5) Use an open-end wrench to screw the nut to the end to ensure that the terminal is well sealed.
Open-end Wrench
