4
Radio Frequency Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules . These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications . Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense .
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s) . Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation .
The antenna used for this radio must be properly installed and maintained and must provide a separation distance of at least
7 .9 inches (20 cm) from all persons .
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment .
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de license. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
