background image

This device complies with part 15 of the FCC Rules. Operation 

is subject to the following two conditions: (1) This device may 

not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause 

undesired operation.
This device complies with Industry Canada licence-exempt RSS 

standard(s). Operation is subject to the following two condi-

tions: (1) this device may not cause interference, and (2) this 

device must accept any interference, including interference that 

may cause undesired operation of the device.
Lé present appareil est conforme aux CNR d'Industrie 

Canada applicables aux appareils radio exempts de licence. 

L'exploitation est autorisée aux deux conditions suivantes : (1) 

l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur 

de l'appareil doit accepter tout brouillage radioélectrique subi, 

même si le brouillage est susceptible d'en compromettre le 

fonctionnement.
Any changes or modifications of this product not approved by 

the manufacturer could void the user’s authority to operate the 

equipment.
This equipment complies with IC RSS-102 radiation exposure 

limits set forth for an uncontrolled environment. This equipment 

should be installed and operated with minimum distance 20cm 

between the radiator & your body.
Under Industry Canada regulations, this radio transmitter may 

only operate using an antenna of a type and maximum (or 

lesser) gain approved for the transmitter by Industry Canada. To 

reduce potential radio interference to other users, the antenna 

type and its gain should be so chosen that the equivalent iso-

tropically radiated power (e.i.r.p.) is not more than that neces-

sary for successful communication.

IOM-PW-SmartStream-C_D

Installation Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-7

Product Specification Tables  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Dimensions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Feed Water Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installation Procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Lamp and Quartz Sleeve Replacement . . . . . . . . . . . . . . . . . . . . . . 11

Disinfection Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Controller Identification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Overview of Screens  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-20

Controller Wiring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Warranty and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Table of Contents

Original Instructions

 

Read this Manual BEFORE using this 

equipment. Failure to read and follow 

all safety and user information can 

result in death, serious personal injury, 

property damage, or damage to the equipment. 

Keep this Manual for future reference.

WARNING

!

This system contains a UV-C emitter (UV lamp)
•  

DO NOT

 look directly at the UV lamp while it 

is ON.  Permanent serious eye damage could 

occur.

•  

DO NOT

 use if UV lamp, housing or any part of 

system is damaged.

•   Any damage to UV lamp or misuse of system 

could result in escape of dangerous UV-C radia-

tion.  UV-C radiation even in small doses can 

cause harm to eyes and skin.  

•  

NEVER

 use UV lamp if it is removed from the 

housing (enclosure).   

•  

ALWAYS

 turn 

OFF

 and disconnect (unplug) sys-

tem from power supply 

BEFORE

 replacing UV 

lamp or performing any repairs or maintenance.

WARNING

!

Installation, Operation and 
Maintenance Manual

 

254 Nanometer Germicidal  

UV Disinfection Systems

Models

PWC012 PWC016 PWC020 PWC025 PWC040 PWC050 

PWD012 PWD016 PWD020 PWD025 PWD040 PWD050

SmartStream

 UV 

Chemical Free Disinfection of Water

SmartStream  UV is certified by the Water Quality
Association (WQA) to NSF/ANSI Standard 372 
for lead free.

UV

Содержание SmartStream UV PWC012

























Отзывы: