![background image](http://html1.mh-extra.com/html/watts/hc-200-series/hc-200-series_installation-and-operating-manual_3877326014.webp)
14
Controller Electrical Connections
Power Supply Connections
Installing the Power Supply:
Note: Power Supply includes a harness with 2 black wires
that connect to circuit board, see page 15.
1. Insert black and black transformer wires into 24VDC input
of control.
2510/2750/2815/2850/2900 Valves*:
Communication Cables
(for multi-tank systems only)
Hinge Mount: mount
per valve model noted
Wire Harness
Meter Cable
Power Supply
3150/3900 Valves:
Wire Harness
Meter Cable
Power Supply
Communication Cables
Hinge Mount: mount
per valve model noted
44404 Rev A
44403 Rev A
*HC-200, HCTA-200 & HCP-200 Systems use 2900/2900S Type Control Valves.
Network / Communication Cables
and Connections
Use a shielded CAT5 Network/Communication cable.
Connect the network/communication cable first before programming.
Cable length between timers/units should not exceed 25 feet.
Connect each unit in series (do not form a loop) together from
one communication port to the next communication port. It does
not matter which one goes to the next one.
Содержание HC-200 Series
Страница 12: ...12 Installation Diagrams Series HCTA 200 Duplex Alternating Systems Top View Side View Front View...
Страница 13: ...13 Installation Diagrams Series HCP 200 Progressive 2 4 Tank Systems Top View Side View Front View...
Страница 17: ...17 Controller Display...
Страница 43: ...43 Flow Data and Injector Draw Rates Down Flow...