![background image](http://html1.mh-extra.com/html/watts/bar-switchcontrol-sc-m2/bar-switchcontrol-sc-m2_original-operating-manual_3753417017.webp)
17
Mounting instructions for accessories and spare parts:
Before working on the bar-switchcontrol,
isolate the unit from the voltage supply!
Spare part set 2: Display window
The display window can be pressed out
using the thumbs. Pull the O-ring over the
new display window before replacing the
spare part in position.
Spare part set 3:
Actuating shaft micro-switch
• Disconnect bar-switchcontrol and remo-
ve from the actuator.
• Press together the snap lock on the
actuating shaft and pull out the shaft.
Press snap lock together here. Equip
the spare actuating shaft with the sup-
plied parts and insert in the housing.
• Mount the bar-switchcontrol, set the cams,
and remake the electrical connection.
Type: SC-M2
Connect to lower switch
at 1, 2, 3. Connect to upper
switch at 4, 5, 6.
1 bue
2 black
3 brown
4 brown
5 black
6 blue
The assignment of end positions to
the switches is depending from the
adjustment of the switching cams.
The assignment of end positions to
the switches is depending from the
adjustment of the switching cams.
1 blue
2 brown
3 blue
4 brown
Type: SC-NS2
Connect the switch at 1, 2.
Connect the switch at 3, 4.
4 blue
5 black
6 brown
Left end
position
1 brown
2 black
3 blue
Right end
position
Type: SC-D2
Connect to switch at 4, 5, 6.
Connect to switch at 1, 2, 3.