![background image](http://html1.mh-extra.com/html/watts/bar-switchcontrol-sc-m2/bar-switchcontrol-sc-m2_original-operating-manual_3753417009.webp)
9
Mounting on the actuator:
When mounting the limit switch box onto the actuator interface, it is impe-
rative to take note of the rotational direction of the actuator pinion, becau-
se incor rect mounting of round initiators can lead to damage to the initiator
and drive. Take care for stress-free mounting of the bar-switchcontrol with
the actuator!
Attention!
1a.
For the mounting on actuators which
correspond with the provided adjusted
mounting measures unscrew the back-
sided screws, set the bar-switchcon-
trol onto the actuator and tighten the
screws again.
1b.
For mounting onto actuators, whose
connection dimensions differ from tho-
se of the mounting feet dimensions
provided, then follow the instructions
below:
• Loosen and remove the two fixing
screws.
• Slide the mounting feet along the
guide to reach the desired height.
•
If distance between the mounting
feet is not correct, then change over
to reach the desired width.
• Take fixing screws and washers and
fix in position.
2.
Place the bar-switchcontrol onto the
actuator interface and fix in position
using the fixing screw set provided.