6
ServiceGuide-ACV-Assure
2133
EDP# 1917123
© 2021 Watts
Snubber Installation for the Pressure Sensor
Follow Wire Color to
Input Terminals
Control Cable,
6 conductors,
22 AWG,
PVC conductor
insulation material
for the Cellular
Gateway
Control Cable, use 4 of the 6 conductors, 22 AWG, PVC
conductor insulation material for the Flow Switch
Connector
Cable
Pressure
Sensor
Teflon
Tape
Snubber
Teflon
Tape
Component Installation Details
Cellular Gateway Wiring
Flow Switch Wiring
Pressure Sensor installation must include the supplied snubber.
1. Mount the snubber at the 1/4" NPT sensing location port.
2. Wrap Teflon
®
* tape on the pressure transducer pipe threads
3. Install the pressure sensor into the snubber using a wrench
on the pressure sensor hex.
4. Install the supplied connector cable.
*Teflon
®
is a registered trademark of The Chemours Company.
