REV. 01 - OCTOBER 2020 - BLÜCHER
®
CONNECTED ROOF
3
1 Introduction
Thank you for buying this BLÜCHER
®
Connected Roof product. We hope that it will live up to
your expectations and make monitoring your roof performance easier.
All documents related to this product can be found at
.
BLÜCHER
®
Connected Roof
allows you to easily supervise the performance of your roof.
The system is designed to detect a possible blocked drainage system before any major
issues occur.
The system consists of
Gateway(s)
and
Monitors
. The Monitor is mounted next to the roof
drain and collects water level- and temperature data. The Monitor sends a wireless signal to
the Gateway.
The Gateway functions as a master to the Monitors with one Gateway monitoring up to 16
Monitors. Additional Gateways must be installed if you have more than 16 Monitors in the
system.
You can set the system up in different ways to receive the information.
1) The information can be read directly on the Gateway display.
2) You can use the relay output to trigger a visual or an acoustic alarm.
3) You can use the Modbus signal to communicate directly with the Building Management
System (BMS).
4) You can apply a GSM-gateway to receive the information on your mobile phone or via
email.
This user manual and installation guide describes the installation and start-up for BLÜCHER
®
Connected Roof Gateway item number #900.000.400, and how to connect the Connected
Roof Monitor item number #900.100.400 to the Gateway.
Prior to installation, please read these installation and operating instructions. Installation
and operation must comply with local regulations and accepted codes of good practice.
Receives signal
from roof monitors
Sending signal
to Gateway
Building Management
System
Climate change