REV. 01 - OCTOBER 2020 - BLÜCHER
®
CONNECTED ROOF
13
6.2
Configuration file
The config file has sections that must be parameterized. All parameters are described in detail
in appendix 13.
Description
Monitor ID’s (Mandatory)
Pair all relevant monitor ID’s. Monitor ID is unique and found
on the Monitor Label. One Gateway supports up to 16
Monitors. Omit all zeros ”0” in front of monitor ID. See label
and configuration file examples below.
General Settings (Optional)
Gateway system settings. No changes needed.
Relay Settings (Optional)
Only needed if the Relay function is needed.
Roof alarm setting (Optinal)
To parameterized the sensitivity of Roof alarms.
BMS Settings (Optional)
If Modbus RTU is used, all connection settings and Monitor
TAG’s are parametrized here.
Monitor ID
