ProtoNode FPC-N34 & FPC-N35 User Manual
CHAPTER 4
– BACnet/IP or Modbus TCP/IP
OMM-0150_B
• 5/20/2021 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page
33
of
140
Figure 4-2: Changing IP Address via Web GUI
•
From the Web GUI’s landing page, click on
Setup
to expand the navigation tree and
then select
Network Settings
to access the IP Settings menu
(
Figure
4-2).
•
Modify the IP Address (N1 IP Address field) of the ProtoNode Ethernet port.
•
If necessary, change the Netmask (N1 Netmask field).
•
Type in a new Subnet Mask
•
If necessary, change the IP Gateway (Default Gateway field)
•
Type in a new IP Gateway
NOTE:
If the ProtoNode is connected to a router, the IP Gateway of the ProtoNode should be set to
the IP Address of the router that it is connected to.
•
Reset ProtoNode
•
Unplug Ethernet cable from PC and connect it to the network hub or router
•
Record the IP Address assigned to the ProtoNode for future reference.