AccUView LED (1/2020)
Rev 2
4
1.4 Vapor Purge
The AccUView LED is equipped with a continuous vapor purge system. A replaceable
desiccant pouch in the lower portion of the instrument dries the air. System heat is used to
warm the air. A fan inside the instrument continuously circulates heated dry air around the
optical well and the flow through cuvette. This feature eliminates the need for a dry purge
line.
The AccUView LED monitors the replaceable desiccant pouch condition continuously.
The LCD display will show
DESC
on the lower line in the event that the desiccant pouch
needs replacement. Replacement desiccant pouches are available from HF scientific, or
the local representative (Part # 21555R). Refer to section 9.2
Replacing or Installing the
Desiccant Pouch
2.0 Safety
This manual contains basic instructions that must be followed during the commissioning,
operation, care and maintenance of the instrument. The safety protection provided by this
equipment may be impaired if it is commissioned and/or used in a manner not described in
this manual. Consequently, all responsible personnel must read this manual prior to
working with this instrument.
In certain instances icons or symbols have been added to give further clarification to the
instructions. Refer to the
Table of Contents
to easily find specific topics and to learn
about unfamiliar terms.
2.1 Symbols Used in this manual
This symbol identifies hazards which, if not avoided, could
result in minor or moderate injury or damage to the
equipment.
This symbol identifies important information, practices or
actions.
This pictorial alert you to the need read the manual,
possibly at a different section.
This pictorial alerts you to electricity, electrocution and
shock hazards.
