pg.2
WATTBOX™ WB-300VB-IP-5 Owners Manual
PACKAGE CONTENTS
(1) WB-300VB-IP-5
(1) Owner’s Manual
(1) OvrC Quick Start Guide
(1) WB-IP Quick Start Guide
(1) Sheet of power cord labels (8 total labels)
(14) Mounting bracket/ear screws (M3 x 0.5)
(1) Remote trigger connector (2-pin, 5mm)
(4) Rubber feet
(1) 4 foot power cord with 360° swiveling head
(1) 6 inch power cord (for use in enclosures and structured wiring cans)
(1) 6 inch extension cord
(2) Right angle mounting brackets
(2) Mounting Brackets- Metal Structure Wiring & Versabox Pro
(2) Mounting Brackets- Plastic Structured wiring Enclosure
(1) Ethernet cable
1. IP Controlled Outlets Banks 1-5 – Each outlet can be controlled individually.
2. Outlet Indicator LEDs – Indicates controlled outlet state. See LED Operation on the next page.
3. Reset – Press to restart the network card (no settings are changed). Note: The reset button does NOT restore factory defaults -
this can be done using the Wattbox Utility Software.
4. UPS Link – For connection to a WattBox IP unit.
5. RJ45 Network Connection – Connect to the Local Area Network (LAN) for IP control and monitoring.
6. Removable Power Cable – Cord is detachable so that the best-fitting length can be used in tight areas.
7. Master Power Switch – Mechanical toggle switch for turning the WattBox IP on and off. Switch illuminates solid when the unit is
powered on.
8. Used to control outlets with a contact closure. Shorting the connector pins together resets any outlet that is set as ‘Enabled’ under
the Input Trigger section.
9. Ground Lug – Ground post for bonding equipment.
10. Indicator LEDs – Indicates current WattBox IP status. See LED Operation on the next page.
DEVICE LAYOUT
REMOTE
TRIGGER
1
2
4
5
6 7
3
8
9
10
