+/- KEYS
These keys are used to change programmable values within the pump. For example,
flow rate. These keys are also used to move the selection bar up and down in the
menus.
MODE
To change modes or mode settings, press the
MODE
key. The
MODE
key can be
pressed at any time to enter the mode menu. If modifying pump settings when the
MODE
key is pressed, it will disregard any setting changes and return you to the
MODE
menu.
SCREEN SAVER
The display refreshes every 60 seconds. When this occurs you may notice a brief
flash.
13.2 SCREEN ICONS
Under certain conditions, various icons will appear in the screen display area:
The pump displays a RED stop icon when it is in a manually stopped
condition. In this state the pump will not start unless the START key is
pressed.
When the pump is running it displays a turning icon to indicate a pumping
state.
Fundamental work with regard to lifting, transportation,
installation, starting-up, maintenance and repair should be
performed by qualified personnel only. The unit must be isolated
from mains power while work is being carried out. The motor
must be secured against accidental start-up.
m-qdos30-manual-11
24
