The exterior surfaces of the pump may get hot during operation.
Do not take hold of the pump while it is running. Allow the pump
to cool after use before handling. The drive unit must not be run
without a pumphead fitted. The pumphead should not be run dry
for extended periods of time. The pump should not be used to
pump fluids where the temperature of the fluid can reach
temperatures of more than 70°C.
Ensure the chemicals to be pumped are compatible with the
pumphead, lubricant, tubing, pipework and fittings to be used
with the pump. Please refer to the chemical compatibility guide
which can be found at: www.wmpg.com/chemical If you need
to use the pump with any other chemical please contact
Watson-Marlow to confirm compatibility
m-qdos30-manual-11
11
