Watson-Marlow 720UN and 720SN User Manual
5
UN, SN
4 When you unpack your pump
Note on lifting
: The pump weighs more than 18kg (the exact weight depends on
model and pumphead—see 8
Pump specifications
). Lifting should be performed ac-
cording to standard Health and Safety guidelines.
Unpack all parts carefully, retaining the packaging until you are sure all components
are present and in good order. Check against the components supplied list, below.
Packaging disposal
Dispose of packaging materials safely, and in accordance with regulations in your
area. The outer carton is made of corrugated cardboard and can be recycled.
Inspection
Check that all components are present. Inspect components for damage in transit. If
anything is missing or damaged, contact your distributor immediately.
Components supplied
720UN and 720SN pumps are supplied as:
Dedicated 720 pump drive unit fitted with 720R, 720RE, 720RX or 720REX
pumpheads (see 8.
Pump specifications
).
A 720N module providing pump ingress protection to IP66, NEMA 4X.
Note
: the module is attached for transit, but must be removed to allow wiring
up, voltage selection and fuse inspection and then re-affixed before the pump is
operated.
The designated mains power lead for your pump
PC-readable CDROM containing these operating instructions
Quick Start manual
Note: Some versions of this product will include components different from those
listed above. Check against your purchase order.
Storage
This product has an extended shelf life. However, care should be taken after storage
to ensure that all parts function correctly. Users should be aware that the pump con-
tains a battery with an unused life of seven years. Long-term storage is not recom-
mended for peristaltic pump tubing. Please observe the storage recommendations
and use-by dates which apply to tubing you may wish to bring into service after stor-
age.
