Watson-Marlow 720UN and 720SN User Manual
48
UN
UN, SN
16.13 Language
The pump can be set to operate in several languages.
In the fourth screen of the Setup menu select
Language
using the
UP
and
DOWN
keys. Press
ENTER
to confirm your choice.
In the next screen, choose a language using the
UP
and
DOWN
keys. Press
ENTER
to confirm your choice. The pump redisplays the fourth Setup screen in
your chosen language. All screens will subsequently appear in your chosen lan-
guage.
16.14 Defaults
All the pump’s user-set data can be reset to factory defaults.
In the fourth screen of the Setup menu select
Defaults
using the
UP
and
DOWN
keys. Press
ENTER
to confirm your choice.
A warning is displayed for four seconds, and the pump asks the user to confirm
that factory defaults are to be reset. Use the
UP
and
DOWN
keys to choose
Yes
if you wish the pump to reset all user-set data back to factory defaults (see
12
Switching the pump on for the first time
); or
No
if you do not wish to do
this. Press
ENTER
to confirm your decision. If
Yes
was chosen, the pump redis-
plays the fourth Setup screen. Switch the pump off and then on again to com-
plete the defaults reset. If
No
was chosen, the pump makes no changes to its
setup and redisplays the fourth Setup screen.
