102R pumphead spares
013.7101.000
102R pumphead
1
MN2645M
Pumphead guard
2
MN0534M
Track
3
MNA0480A
Tube clamp
4
MN0119S
Spring to hold tube clamps in position
5
FN2313
Screw to secure tube clamps to pumphead track
6
FN0076
Screw fasteners to secure pumphead to drive
7
MNA0381A
Rotor assembly, 8mm shaft
102R performance data
Flow rates are normalised test values obtained using new tubing with the pumphead rotating clockwise
pumping water at 20C with negligible inlet and discharge pressure. Actual flow rate achieved may vary
because of changes in temperature, viscosity, inlet and discharge pressures, system configuration and
tubing performance against time. Flow rates may also vary due to normal manufacturing tolerances of
thetubing. These toleranceswillmake flowratevariance more pronounced atsmaller bore sizes.
For precise and repeatable performance it is important to determine flow rates under
operating conditions for each new piece of tubing.
m-120-en-02
46
