Watson Marlow Pumps 323Du, Руководство пользователя

Страница: 6 / 30

6
MemoDose
323S 323U 323Du
400 400 400
220 220 220
Set the pump speed
and direction. Place a
suitable measuring
container at the outlet
and
the pump.
When the required
volume of fluid has been
dispensed, press the
key twice within half a
second. This starts the
MemoDose feature.
The pump has made a record of the fluid it has just dispensed. You may now repeat
this dose or adjust the quantity as required. The display will show “
dos “ for 3
seconds. Then the display will change to show 100%.
Measure the quantity of fluid which has been dispensed. If the quantity is correct press
to repeat the dose.
If the initial dose is larger than required use
key to reduce the volume % showing on the
display. This will reduce the next dose to be
dispensed by the pump.
If the initial dose was smaller than required use
the
key to increase the next dose to be
dispensed by the pump.
Press The pump will dispense the new dose and the display
will count down as this dose proceeds. The pump will stop when
the new dose is complete.
Measure the new dose. If it is correct you may now repeat this
dose as often as required. The keypad lock can be used to
prevent further changes.
Use the and keys to further adjust the dose until the
correct quantity is obtained. You may adjust the dose size down
to 1% or up to 999%
Press key twice within half a second to exit MemoDose and return
to manual operation.
The pump can dispense a set quantity or dose of fluid each time the
key is pressed. This is the MemoDose facility.