Watson Marlow Pumps 323Du Скачать руководство пользователя страница 5

Страница: 5 / 30

323E 323S

323U 323Du

400

220

323S

323U

323Du

400

220

Manual control

•

You can adjust the speed on the display while the pump is stopped or
running.

•

Use the

key to increase the set speed. Use the

key to reduce the set

speed. We recommend that the speed is reduced to a minimum before
starting the pump.

•

The 323E increments in steps of 5rpm. The 323S, 323U and 323Du
increment in steps of 1rpm.

•

Press the

key to reverse the direction of rotation.

•

The direction is shown by the rotation symbol. The direction may be changed
while the pump is stopped or running.

•

Start the pump with the

key.

•

The rotation symbol will move to confirm that the pump is operating. The symbol is static when the pump is

stopped.

•

Stop the pump with the

key. The pump will stop immediately.

•

The display will continue to show the previous speed and direction. The pump will return to this speed when the

key is pressed again.

•

You can reduce the pump speed to 0 rpm with the

key. The pump is still in the running state and the rotation

symbol will continue to move. Press the

key to return the pump to the minimum speed.

Keypad lock

•

The keypad can be locked to prevent changes to pump speed or other settings, and make it
possible only to start or stop the pump. The padlock symbol will show on the display.

•

Set the pump running. Hold down the

key for more than 2 seconds to lock the keypad. The

padlock symbol will show and only the

and

key will function.

•

The keypad may also be locked while the pump is stopped. Hold down the

key for more than 2 seconds. The

padlock symbol will show. The pump will start and stop but the speed and direction will be locked.

•

To unlock the keypad while the pump is running hold down the

key for a further 2 seconds. The padlock

symbol is removed. If the pump is stopped hold down the

key until the padlock symbol is removed.

Содержание 323Du































Результаты поиска

Содержание 323Du

Отзывы:

Похожие инструкции для 323Du

Бренды по названию

Популярные бренды

Watson Marlow Pumps 323Du, Руководство пользователя

Результаты поиска

Содержание 323Du

Отзывы:

Похожие инструкции для 323Du

Бренды по названию

Популярные бренды