Watkiss Vario, Руководство по эксплуатации

Страница: 84 / 110

80
FRICTION FEED PROBLEMS
Problem Cause Solution
DOUBLE FEEDS Too much tray pressure Reduce by moving handle in by
one notch at a time (see p.30)
Too little separation pressure Increase by moving the lever
down by one notch at a time (see
p.29)
Insufficient air separation Increase the value of
AIR BLOW
in the
BASIC
window
Worn or missing separators Check separators are present,
and replace if worn (see p.73)
Bad guillotine burr, or blunt drill-
ing Fan the stock by hand before
loading, ensure paper is cut well
next time
Miscalibration during the test set Run another test set by touching
, followed by
TEST SET
fol-
lowed by
MISS FEEDS Too little tray pressure Increase by pulling the handle out
by one notch at a time (see p.30)
Too much separation pressure Reduce by moving the lever up
by one notch at a time (see p.29)
Untidy loading Reload the bins tidily, ensuring
the paper stack is underneath the
feed wheels and under the
guides
Worn feed wheels Check and replace the feed
wheels if necessary (see p.74)
Miscalibration during the test set Run another test set by touching
, followed by
TEST SET
fol-
lowed by . It may be necessary
to increase the tray pressure to
obtain a better feed