Watkiss Vario, Руководство по эксплуатации

Страница: 30 / 110

26
enter the new job name and then touch
OK
or
CLOSE
.
The original job is unchanged.
If the job name is not changed before touching
OK
or
CLOSE
, the job will be saved with the current name,
suffixed by an asterisk.
JOB DETAILS
Touching
JOB DETAILS
shows the settings for each saved
job. Select the job that you wish to view from the job list
and touch
JOB DETAILS
to see a summary of the job
settings.
LOAD
To load a job, select it on the job list using the up and
down arrows or by touching it. Touch the
LOAD
button.
You must touch
END JOB
before loading a job.
PADLOCK SYMBOL
The padlock symbol is used to lock and unlock saved
jobs. Each saved job has a small padlock symbol next to
it, to show whether it is locked or not. To lock or unlock a
job, select it on the job list and touch the large padlock
button.
Some padlock symbols may be greyed out. This is be-
cause there are several access levels to the system,
which can be used to prevent jobs being altered.
DELETE
To delete a particular job it must be unlocked. Select the
job from the job list using the up and down arrows or by
touching it. Touch and hold
DELETE
. A red bar will
appear, filling from left to right. Continue to hold until the
red bar reaches the right-hand side.
VIEW OF JOB LIST VIEW OF JOB LIST
alters the order in which saved jobs
are listed, either alphabetically or most recent first.
There is a line between Factory Template jobs, and other
jobs saved by the operator. The Factory Template jobs
are always listed first: only the operator-saved jobs can
be reordered.
A->Z:
To list jobs alphabetically, touch
A->Z
.
BY USE:
To list jobs in the order they were last used, touch
BY USE
. The job that was run most recently will appear
at the top of the list.