6 - Maintenance - Lubricate the Stitch Head
Watkiss PowerSquare™224 User Manual
115
Lubricate the Wire-feed Cam
Reset the Operator Maintenance Counter
1. Touch
MENU
.
2. Touch and hold
RESET
. A red line appears. The red line fills from left to right.
Hold
RESET
until the red line reaches the right-hand side.
3. Touch
MENU
.
FIGURE 66. Lubricate the wire-feed cam
Nozzle of the tube of grease
Wire-feed cam
Feed lever
Step
Action
Information
1
Apply 10mm of grease from the
tube between the bearing surface
of the wire-feed cam and the feed
lever.
2
Lower the PowerSquare main
deck.
3
Lower the clincher frame.
See “Lower the Clincher Frame”
on page 35.
4
Close all of the covers.
5
Make some test books.
6
Clean excess grease from the top
of the stitch head.
See “Clean excess grease from
the Stitch Head” on page 110.
10mm
Содержание PowerSquare 224
