Watkiss PowerSquare 224, Руководство пользователя

Страница: 36 / 134

4 - Standard Tasks - Adjust the Side-Trim Offset
32
Watkiss PowerSquare™224 User Manual
Adjust the Side-Trim Offset
Introduction
By default, the book is side-trimmed by an equal amount on each side. The
side-trim dimension is automatically calculated to trim 2.5mm from each side.
For example, if the book is 210mm wide, the default trim is 205mm. This side-
trim dimension can be changed. Touch
BASIC > SIDE TRIM
and then touch ‘ + ’ or
‘ - ’ to adjust the
TRIM SIZE
.
The side-trim can be offset from the centre line by a maximum of 40mm,
dependent on how much is to be trimmed. The machine will not permit a setting
that conflicts with the stitch position. Change the stitch pitch if necessary (see
“Adjust the Stitch Pitch” on page 31).
If the
TRIM OFFSET
is changed, the icon changes to show the setting. The icon is
the same orientation as the book delivery out of the Side-Trimmer.
Select a non-standard side-trim offset
1. Touch
BASIC > SIDE TRIM
and then touch ‘ + ’ or ‘ - ’ to adjust the
TRIM OFFSET
.
2. Touch
CLOSE
to close the window.
Select the default side-trim offset
1. Touch
BASIC > SIDE TRIM
and then touch
AUTO
.
2. Touch
CLOSE
to close the window.
Maximum side-trim offset
Trim
(x2) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Max
offset 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0
Offset = -5.0 Offset = 0.0 Offset = +5.0
Negative setting
More is trimmed from
the left side of the
book.
Zero setting
The same amount is
trimmed from each
side of the book.
Positive setting
More is trimmed from
the right side of the
book.