Watkiss PowerSquare 224, Руководство пользователя

Страница: 64 / 134

5 - Error Conditions, Problems and Solutions - Book Quality Problems
60
Watkiss PowerSquare™224 User Manual
Spine form problems
Correct spine-form Incorrect spine-form.
The square spine is part
formed or not formed. Incorrect spine-form.
The spine is over-formed
and the book is damaged.
 

Is the spine-form different at each end of the spine?
Yes No
The spine is incorrect along the full length. Is the folder cover closed fully?
Yes No
Lock the folder cover. See “Close the Folder Cover” on page 34.
Is the
SET THICKNESS
or
SHEET THICKNESS
correct?
Yes No
Measure the
SET THICKNESS
or the
SHEET THICKNESS
and enter the
value in the touch screen. Does the problem continue?
Yes No
Further action is not needed.
Check the
THRESHOLD
setting. If the
SET THICKNESS
is less than
the
THRESHOLD
, a square spine is not formed. See “THRESHOLD”
on page 21. Adjust
THRESHOLD
if needed. Does the problem con-
tinue?
Yes No
Further action is not needed.
Adjust the
PRESSURE
setting. Increase the
PRESSURE
to give more spine-
form and decrease the
PRESSURE
to give less spine-form.
Does the problem continue?
Yes No
Further action is not needed.
Adjust the
NUMBER
of forms setting. Increase the
NUMBER
of forms to give
more spine-form and decrease the
NUMBER
of forms to give less spine-
form. Does the problem continue?
Yes No
Further action is not needed.
Load a Default Job. This will reset the
FORM
settings, including
PRESSURE
,
NUMBER
and
THRESHOLD
. See “Reset the PowerSquare to default set-
tings” on page 30.
Does the problem continue?
Yes No
A B C