Watkins Wellness UPRITE, Руководство по установке

Страница: 3 / 16

2
Cordless Drill Flat Head
Screwdriver
7/16” Socket with
Ratchet
Safety Glasses #2 Square Drive
Bit
1/8” a Drill Bit Fine Tip Marker 1/2” Wrench 7/16” Wrench Straight Edge
Ruler 24” - 36”
INSTALLATION REQUIREMENTS
TOOLS REQUIRED
IMPORTANT INFORMATION
• Two technicians are recommended for installation.
• Read all of the instructions thoroughly before performing this installation.
• There must be a minimum of 7” clearance between the wall and the retracting side of the spa for
cover to operate properly and 3” on each side for Side Arm clearance.
• NOTE: Consider spa cover wind skirt length when considering installation of cover lifter.
• The Warning Label is always on the front of the cover; the lifter will attach on either the back side
of the spa or the left side of spa depending on cover confi guration.
• On Endless Pools models the lifter will attach on either the back or front of spa.
• To ensure that the cover seals correctly, the spa must be leveled.
3.175mm