Waterstage Waterstage Comfort 10, Инструкция по установке и эксплуатации

Страница: 38 / 60

Line Function Setting range
or display
Setting
increment
Basic
setting
Time program 5 / Cooling
If the installation is fitted with the cooling kit (Only with the cooling kit option).
600 U Pre-selection (Day / Week) Mon-Sun, Mon-Fri, Sat-Sun,
Monday, Tuesday, …
Mon-Sun
601 U 1st phase On (start) 00:00... --:-- 10 min 8:00
602 U 1st phase Off (end) 00:00... --:-- 10 min 20:00
603 U 2nd phase On (start) 00:00... --:-- 10 min --:--
604 U 2nd phase Off (end) 00:00... --:-- 10 min --:--
605 U 3rd phase On (start) 00:00... --:-- 10 min --:--
606 U 3rd phase Off (end) 00:00... --:-- 10 min --:--
615 U Copy
616 U Default values No, Yes No
Yes + OK: The default values memorised in the regulator replace and cancel the customised heating programs. Your
customised settings are therefore lost.
Holidays, heating circuit 1 (For the Holiday program is active, the heating mode should be on AUTO).
641 U Preselection Period 1 to 8 Period 1
642
U
Period Start (Day / Month) 01 01 31 12 1
643 U Period End (Day / Month) 01 01 31 12 1
648 U Operating level Frost protection, Reduced Frost
protection
Holidays, heating circuit 2 (For the Holiday program is active, the heating mode should be on AUTO).
If the installation consists of 2 heating circuits (Only with the 2nd circuit kit option).
651
U
Preselection Period 1 to 8
Period 1
652 U Period Start (Day / Month) 01 01 31 12 1
653 U Period End (Day / Month) 01 01 31 12 1
658 U Operating level Frost protection, Reduced Frost
protection
Heating, circuit 1
710 U Comfort setpoint Reduced setpoint…
Comfort setpoint maximum
0,5 °C 20 °C
712 U Reduced setpoint Frost protection setpoint…
Comfort setpoint
0,5 °C 19 °C
714 U Frost protection setpoint 4 °C… Reduced setpoint 0,5 °C 8 °C
716 S Comfort setpoint maximum 20 °C 35 °C 1 °C 28 °C
720 I Heating curve slope ( figure 32, page 35 ) 0,1... 4 0,02 0,5
721 I Heating curve displacement ( figure 33, page 35 ) -4,5 °C... 4,5 °C 0,5 °C 0
726 I Heating curve adaption Off, On Off
Warning !
Not to modify, let on "Off".
730 I Summer / Winter heating limits 8 °C 30 °C 0,5 °C 18 °C
When the average of the outside temperatures over the past 24 hours reaches 18°C, the regulator switches off the heating
(as an economy measure). During summer mode, the display shows "Eco". This function is only active in automatic mode.
732 S 24-hour heating limit -10 °C... 10 °C 1 °C -2 °C
This function enables you partially to offset the automatic summer / winter switchover during the intermediate seasons.
Increasing the value delays the switchover to summer regime.
Decreasing the value advances the switchover to summer regime.
This function is only active in automatic mode.
Installation and operating manual "1532 - EN"
Air to Water Heat Pump
- 38 -