Watersnake
8
PRE INSTALLATION
PRE INSTALLATION CHECKLIST
• Introductory video links are available for the
Watersnake Geo-Spot electric motor. The
videos include an unboxing video as well as
a full operational guide video. Scan the QR code
to go to the Watersnake Geo-Spot page on the
Jarvis Walker website or go to:
https://www.jarviswalker.com.au/watersnake-geo-spot-gps-bow-mount-motor.html
• Familiarise yourself with this user manual and the various parts of your
Watersnake motor, labelled in the illustrations.
• Select desired mounting location on boat.
• 12v deep cycle battery (your Watersnake motor is not designed for use
with car / truck / motorcycle type batteries) – for more information about
appropriate batteries for your Watersnake motor, refer to page 18.
• Check battery cable length in relation to location of your 12v deep cycle
battery. If extension to battery cable is required, refer to table on page 19.
FITTING THE MOTOR TO THE BOAT
TOOLS REQUIRED
• Power drill
• 6mm drill bit
• Phillips head screwdriver
• Hex key, 5mm (for optional quick release plate mounting)
• 10mm spanner/shifter
• Prop nut wrench (supplied)
• Marine grease
Power Drill
Phillips Head
Screwdriver
Spanner/
Shifter
Prop Nut
Wrench
Marine Grease
Hex
Key
Drill
Bit
Watersnake Geo Spot GPS Manual v3 2021.indd 8
18/5/21 4:31 pm
