Watersnake
20
REMOTE CONTROLLER
REMOTE CONTROL
Do not attempt to operate the Remote Control while outside your floating boat.
The Remote unit is splashproof but not submersible. Do not immerse.
Use the lanyard provided to ensure the Remote is at hand whenever required.
Do not wipe screen if there is a layer of dried salt, grit or sand on it. Remove
gently with a soft, damp cloth to prevent scratching.
Use the neck lanyard for convenience but be careful not to immerse when
leaning close the the water.
• The 3 x AAA batteries installed provide up to 100 hours of operation if
backlight brightness and timeout are at lowest settings. See Remote section.
• Battery condition indicator is at top right corner of home screen when power
is on.
• Battery compartment is on underside and requires phillips head screwdriver.
To ensure ultimate reliability, keep spare batteries and suitable screwdriver on
board.
• Watersnake recommends you carry spare batteries for the FOB on your boat
at all times to ensure you have replacements in case of failure of those in the
FOB unit. ( This fob unit requires 3 x AAA batteries )
REMOTE CONTROL OPERATIONS
BUTTON DESCRIPTION
1
Menu left
2
Menu up
3
Menu right, Power on/off
4
Heading Fix/Course Fix on/off
5
Menu down
6
Navigation function menu
7
Propeller acceleration
8
Turn left
9
Propeller start/stop
10
Turn right
11
Propeller deceleration
12
Cruise Mode start/stop
13
Anchor Mode on/off
14
Record menu
1
4
8
11
12
13
14
6
7
10
9
2
3
5
Watersnake Geo Spot GPS Manual v3 2021.indd 20
18/5/21 4:31 pm
