www.watersnake.com.au
15
ATTACHING THE PROPELLER
Before doing anything with the propeller, ensure the
cables to the battery are disconnected.
1: Place shear pin in shaft as shown.
2: Align the propeller against the shear pin on the shaft
(there is a groove on the back of the propeller which the shear pin
needs to slot into)
and then tighten the propeller nut securely using the propeller wrench.
Do not overtighten; check regularly.
1
2
Shear Pin
Propeller Shaft
Propeller
Propeller nut
PROPELLER ASSEMBLY
Propeller
Wrench
Watersnake Geo Spot GPS Manual v3 2021.indd 15
18/5/21 4:31 pm
