Watersnake
26
INITIAL POWER-UP ( CONTINUED )
• The upper LED is the unit’s Status Light. Its variable colour display signals
important states of your Watersnake GPS.
• Yellow Status Light: When unit is turned on, Status Light glows YELLOW
as unit searches for GPS signals. Superior GPS results occur outdoors, away
from tall buildings, bridges etc.
• Green Status Light: When unit establishes a GPS connection, usually within
a few seconds, status LED FLASHES GREEN, THEN TURNS SOLID GREEN.
Unit can be operated by the optional foot pedal only (when cable is connected)
at this time.
• Flashing Red Status Light: Motor is in stowed position and will not
activate for safety reasons.
• Power up Remote Control by
holding down Red Key 3 for two
seconds, then release and the
screen illuminates. Motor unit
should respond with
“shave-and-a-haircut” pairing
signal. Status light GREEN.
Hold on! Just a few more things...
GPS USER INSTRUCTIONS
Red Key
Watersnake Geo Spot GPS Manual v3 2021.indd 26
18/5/21 4:31 pm
