Waters Network Systems
User’s Manual
Page 38
PSX/MS1008-TX
1.
Group ID
- A link aggregation can be created across two or more ports. Select
the
Group ID
and then click on
Get
.
2.
LACP
– If enabled, the group is the LACP static trunking group. If it is disabled,
the group is the local static trunking group.
3. All ports support LACP dynamic trunking group. If connecting to a device that
also supports LACP, the LACP dynamic trunking group will be created
automatically.
4.
Work ports
- The maximum number of ports can be aggregated at the same
time. If LACP static trunking group, the ports exceeding the maximum are on
standby and able to aggregate if a work port fails. If it set to local static trunking
group, the number must be the same as group ports.
5. Select the ports to join the trunking group
6. If LACP enabled, you can configure LACP to either
Active/Passive
status in
each ports.
7. Select
Apply
to apply the settings.
5.7 Aggregator Information
The
Aggregator Information
screen displays the LACP information.
