Waters Network Systems
User’s Manual
Page 23
PSX/MS1008-TX
4.14
VLAN Configuration
The
VLAN Configuration Menu
can be accessed from the
Switch Static
Configuration
Menu
. VLANs are
disabled
by default. Once you have
enabled
VLANs,
you may choose between the following:
802.1q
802.1q with GVRP
Port-based
PVID (Port VID):
Set the port VLAN ID that will be assigned to untagged traffic on a
given port. This feature is useful for accommodating devices that you want to participate
in the VLAN but that don’t support tagging. Only one untagged VLAN is allowed per port.
Ingress Filter 1:
Forward only packets with VIDs matching this port’s configured VID.
Use the
Space
bar to choose to forward or drop the frame that the VID does not match
this port’s configured VID.
Ingress Filter 2:
Drop untagged frame. Use the
Space
bar to choose drop or forward
the untagged frame. Once you have set VLANs to
enabled
, you are ready to create a
VLAN group.
4.15
Creating a VLAN Group
1. Select
Create a VLAN Group
from the
VLAN Configuration Menu
.
2. Provide the following information for the VLAN:
VLAN Name:
Type a name for the new VLAN.
VLAN ID:
Type a VID (between 2~4094). The default is 1.
Protocol VLAN:
Press the
Space
bar to choose the type of protocol.
