Waters Network Systems
User’s Manual
Page 31
PSX/MS1008-TX
4.28 System Options
The following settings can be made from the
System Options Menu
.
System Name
– Enter a name to be used for the switch.
System Contact
– Enter the name of contact person or organization.
System Location
– Enter the location of the switch.
4.29
Community Strings
Use the
Community Strings Menu
to enter the following information:
Community Name
- Enter the name of current strings.
Write Access
– Determine the rights. Choose between:
o
Read only
- Read only enables requests accompanied by this string to display
MIB-object information.
o
Read/Write
– Read/write enables requests accompanied by this string to display
MIB-object information and to set MIB objects.
4.30
Trap Managers
A trap manager is a management station that receives traps or system alerts generated
by the switch. If no trap manager is defined, no traps are received. To create a trap
manager, enter the IP address of the station and a community string.
4.31
GVRP
The
GVRP Menu
allows you to enable and disable the GVRP (VLAN Registration
Protocol). GVRP is
disabled
by default.
4.32
LACP
The
LACP Configuration Menu
provides the following options:
Aggregator Setting
State Activity
LACP Status
4.33
Aggregator Setting
Group:
Display the trunk group ID.
LACP:
Use the
Space
bar to enable or disable LACP (Link Aggregation Control
Protocol) support. If it is enabled, the group is LACP static trunking group. If it is
disabled, the group is local static trunking group.
LACP Work Port Num:
This setting is the maximum number of ports that can be
