Waters Network Systems
User’s Manual
Page 22
PSX/MS1008-TX
Enabled
– You can disable or enable the port control.
Auto Negotiate
– You can enable or disable auto negotiation per port.
Speed/Duplex Config
– Ports 1-8 can be set to 100Mbps or 10Mbps speed. Port 9
can only be set to 1000Mbps and set full-duplex or half-duplex mode.
Flow Control
– You can set flow control function to be enabled or disabled. Flow
control is
enabled
by default.
Group
– You can set trunk group for port 1~port 8. You can set up to four trunk
groups.
4.13
Port Mirroring Configuration
Port mirroring is a method used for monitoring traffic in switched networks. Traffic can be
monitored through ports by one specific port. The traffic that goes in or out monitored
ports will be duplicated into the monitoring port. Port mirroring is
disabled
by default.
Port Mirroring
can be accessed from the
Switch Static Configuration
Menu
.
Port Mirroring State -
Use the space bar to toggle from
Disable
to
Enable
for
port-mirroring function.
Mirroring Port -
The mirror port can be used to see all monitored port traffic.
Source Port -
The source port is the port you want to monitor. All monitored port
traffic will be copied to sniffed port. You can select a maximum of nine ports to monitor
in the switch. User can choose to monitor RX frames only or TX frames only or both
RX and TX frames from the port.
