WaterRower SERIES III Скачать руководство пользователя

Страница: 16 / 18

www.waterrower.com

WRM0200 RevB

STEP SEVEN

Undo each Dolley Wheel assembly (2) and fix to each rail as shown and tighten with the allen key provided.

STEP EIGHT

Stand the WaterRower upright and connect the bungee to the recoil strap

STEP NINE

Some things to check before filling the tank and rowing.

Tacho Belt

- there is a small green tacho belt which is under the top deck of the machine, immediately above

the clutch assembly around which the drive strap is wrapped. During shipment this can sometimes become

dislodged effecting the monitor function. If the tacho belt has dislodged, gently lift the tacho belt back onto its

pulleys using a slender screwdriver. Ensure that the two tacho pulleys are correctly aligned. If not the position

of the small tacho pulley may be adjusted by sliding it up or down the tacho motor spindle.

Recoil Belts

- ensure that the recoil belts pass smoothly over all three guide pulleys.

Содержание SERIES III



















Результаты поиска

Содержание SERIES III

Отзывы:

Похожие инструкции для SERIES III

Бренды по названию

Популярные бренды

WaterRower SERIES III, Руководство пользователя

Результаты поиска

Содержание SERIES III

Отзывы:

Похожие инструкции для SERIES III

Бренды по названию

Популярные бренды