www.waterrower.com
WRM0200 RevB
MAINTAINING THE WOOD
The natural wood WaterRowers are finished with Danish Oil which gives a deep penetrating finish to the
hardwood frame. Other than occasional dusting or polishing, the wood requires no maintenance. Over time,
expect your Oxbridge WaterRower to develop a wonderful dark patina.
ASSEMBLY
Your WaterRower comes partially assembled in two boxes for protection during transit and for economy of
shipment. Assembling your WaterRower should take about half an hour. The tools you will need have been
provided.
We have all experienced the frustrations caused by incomprehensible assembly instructions. For this reason
we have gone to added effort to make our instructions as clear and concise as possible. Do not be intimidated
by the detail:- it is simply intended to make the assembly process as comfortable as possible for you.
STEP ONE
Lay the rails on the floor, black rail extrusions facing in, and connect the rear spacer using the male JCN nuts
and the allen key provided. The allen key can be found attached to the rear spacer.
STEP TWO
Sit the seat between the rail, with the indent on the seat facing towards the rear of the machine, (to allow for
clearance of the tail bone). It may be necessary to slightly separate the rails to allow the seat to sit into place.
STEP THREE
Place the tank assembly between the rails.
Rear Spacer
FemaleJCN Allen Key
