77
|
90
Adding the Compressor Oil
1
3
Use the illustrations and instructions to add oil to
the sump. Purge the pressure from the system
before adding the oil. Use ISO 68 low-foaming or
anti-foam hydraulic oil.
• Purge all pressure before
servicing.
• Liquid ejected at high
pressure can cause
serious injury.
High Pressure
1 When all pressure has been purged from the
system, remove the oil fill cap.
2 Add oil to the compressor, then run the
compressor for 10 seconds to circulate the oil
through the system.
Note:
After pouring some oil into the
compressor, allow it to settle before
adding more to avoid over-filling.
3 Add oil until it reaches halfway up the sight
glass.
4 Install the oil fill cap.
2
Содержание Eclipse
Страница 3: ......
Страница 45: ...Notes...
Страница 90: ...Waterous Company 125 Hardman Avenue South South Saint Paul MN 55075 651 450 5000 www waterousco com...
