Waterous Eclipse, Инструкция по установке, эксплуатации и обслуживанию

Страница: 29 / 90

29
|
90
Safety Introduction Product Overview Installation Operation Troubleshooting Maintenance
Auto-Sync Mode Switch
Feature Feature Description Description
1 Power wire This connects to apparatus power.
2 Wire harness connector This connects to the wire harness on the auto-sync assembly.
3 Mounting holes These secure the plate to the apparatus.
4 Unload mode This mode operates the compressor at approximately 40 psi (2.8 bar). The compressor generates a minimum pressure of
40 psi to circulate the compressor oil and cool the system. Always start the compressor in this mode or auto mode.
5 Auto mode This mode operates the compressor at 50 to 150 psi (3.4 to 10.3 bar). The system automatically adjusts the air pressure as
you raise and lower the water pressure. Always start the compressor in this mode or unload mode.
6 Fixed mode This mode operates the compressor at 150 psi (10.3 bar) regardless of water pressure.
7 3-way switch This toggles between the 3 operation modes.