F-1031, Section 4212
Page 38 of 61
Mechanical Seal Removal
(Without Disassembling the Pump)
1. Replacing the mechanical seal will be easier when using the special tools designed by Waterous Company. These tools may be
purchased from Waterous Company or fabricated by the user.
K956
Outboard bearing removal/installation tools
K628
Mechanical seal removal/installation tools
Parts of Kit K 628
Mechanical Seal Removal / Installation Tools
REMOVAL TOOL
P/N 72385
TOOL PROTECTION SLEEVE/INSTALLATION TOOL
(Use as a cover to protect removal tool
threads when not in use)
P/N 62896 PART OF 72385
IMPELLER SHAFT BRUSH
P/N V 2633
INSTALLATION
SLEEVE
P/N 52280
2. Whenever a mechanical seal requires replacement, the Waterous Service Department strongly recommends replacing both seals;
out•
board bearing and drive end.
NOTE: Always replace the outboard seal and bearing assembly first.
