92
|
107
Safety
Introduction
Product Overview
Installation
Operation
Troubleshooting
Maintenance
Maintenance Schedule
Perform the following procedures at the recommended intervals at a minimum. Environmental conditions affect the maintenance requirements. Inspect the
components frequently and create a maintenance schedule suitable to your application and environment. Replace wear components with equivalent components.
Use your serial number to gain access to the service parts lists associated with your system through the MyWaterous login at
www.waterousco.com
.
Operation
Operation
Initial
Initial
Operation
Operation
Daily
Daily
Weekly
Weekly
12 Months
12 Months 24 Months
24 Months
Comment
Comment
Check the oil level.
X
X
Inspect the hoses and fittings.
X
X
Service operation.
X
Operate the system in air only mode once a week for
15 minutes.
Change the oil.
X
Change the oil after the first 30 hours of operation,
then yearly after that.
Change the oil filter.
X
Replace the oil filter when you replace the oil.
Inspect the mounting hardware.
X
Change the separator filter.
X
Replace the separator filter after a sudden increase
in oil consumption.
Change the air filter.
Replace as necessary per environmental conditions.
Replace the air filter more often in dusty or dirty
environments.
Clean the wye strainer.
Clean after each use. This is dependent on water quality.
Clean the wye strainer after each use. This is
dependent on water quality.
