91
|
107
Safety
Introduction
Product Overview
Installation
Operation
Troubleshooting
Maintenance
Shutting Down the System
1
3
Q-1230286
1. Press ON/OFF button to start or stop system.
2. Set Foam % ratio.
3. Upper (Blue) LED:
Solid on - System standby.
Slow flashing - System injecting.
Fast flashing - Manual mode.
4. Lower (Red) LED:
Flashing - Concentrate in tank low, 2 min to shutdown.
Solid on - No concentrate, system shutdown.
FOAM %
ON/OFF
2
4
Use the illustrations and instructions to create a
shutdown procedure for your application.
1 Close the air valves.
2 Disengage the foam proportioner, then flow
water though the discharge hoses until all
bubbles are gone.
3 Close the discharge valves.
4 Toggle the auto-sync switch to the
Unload
position.
