78
|
107
Safety
Introduction
Product Overview
Installation
Operation
Troubleshooting
Maintenance
Installing the Temperature Gauge
1
4
2
5
3
8
6
7
Use the illustrations and instructions to install the
temperature gauge.
Note:
Locally source the appropriate wire and
connectors for the gauge.
1 Create the cutout for the temperature gauge.
Refer to:
"Dimensions—Temperature Gauge"
on page 52.
Use the provided hardware to
secure the temperature gauge to the apparatus.
2 Connect the temperature gauge signal terminal
to the larger spade on the temperature sender.
3 Connect the temperature gauge positive
terminal to the appropriate power distribution
circuit.
4 Connect the temperature gauge negative
terminal to frame ground.
5 Connect the smaller spade on the temperature
sender to the appropriate power distribution
circuit. Install a locally sourced warning light
into the circuit, then mount the light on the
operator's panel.
6 Connect one temperature gauge light terminal
to chassis ground.
7 Connect the other temperature gauge light
terminal to the positive side of the power supply.
8 Use the provided resistor and bulb with a 24 V
power source.
