infiniti
Operating, Installation, and Service Manual Page 17 - Revision: 9-15-2016
Drain the Cold Water Tank and Circuit
3.
Remove lower front panel to access tank feed lines.
4.
Loosen the two screws holding the filter head
bracket to remove filter head bracket to access rear
of filter heads.
5.
Disconnect tank line feed lines from hot and cold
inlet solenoids at rear of filter head fittings).
6.
Catch hot (hot water should have cooled down after
dispensing 2 liters of water prior to the draining
process) and cold water drain into basin or catch.
7.
Reconnect tubing into inlet elbows once drained, and reinstall
the filter head bracket.
8.
Dry inside of unit if necessary.
9.
Replace lower front panel.