background image

3

ENVISION AIR COILS INSTALLATION MANUAL

WARNING: Before performing service or 
maintenance operations on a system, turn off main 
power switches to the equipment. If applicable, 
turn off the accessory heater power switch. 
Electrical shock could cause personal injury. 

Installation and servicing heating and air conditioning 
equipment can be hazardous due to system pressure and 
electrical components. Only trained and qualified service 
personnel should install, repair or service heating and air 
conditioning equipment. Untrained personnel can perform 
the basic maintenance functions of cleaning coils and 
cleaning and replacing filters. All other operations should 
be performed by trained service personnel. When working 
on heating and air conditioning equipment, observe 
precautions in the literature, tags and labels attached to the 
unit and other safety precautions that apply.

Follow all safety codes. Wear safety glasses and work 
gloves.  Use a quenching cloth for brazing operations and 
have a fire extinguisher available.

NOTE:

  Local codes and regulations take precedent over 

any recommendations by the manufacturer. In addition to 
conforming to manufacture’s and local municipal building 
codes, the equipment should be installed in accordance 
with the National Electric Code and National Fire Protection 
Agency recommendations.

 

Model Nomenclature

Initial Inspection

When the equipment is received, all items should be 
carefully checked against the bill of lading to be sure all 
crates and cartons have been received. Examine units 
for shipping damage, removing the units from packaging 

if necessary. Units in question should also be internally 
inspected. If any damage is noted, the carrier should make 
the proper notation on the delivery receipt, acknowledging 
the damage.

Safety Considerations

NR

A

C

026

C

Model Type

Cabinet

   NR = Envision Series Refrigerant Coils

  NH = Envision Series Hydronic Coils

   C = Encased

  U = Uncased

Configuration

  A = “A” Coil

Capacity

Refrigerant Models

  026 MBTUH

  036 MBTUH

  048 MBTUH

  060 MBTUH

Hydronic Models

  060 MBTUH

Coil

NOTE: 

All Refrigerant Coils include TXV.

1-2

3

4

5-7

8

Содержание Envision NHAC026

















Отзывы: