System Description
The WaterCop® SmartConnect is designed to work alongside a WaterCop® System to
deliver real time notifications of leaks in your plumbing system and remotely control the
WaterCop valve to shut off the water supply using an app on your smartphone or tablet.
The SmartConnect unit is powered by the WaterCop AUX I/0 port through a CAT5 or
CAT6 cable. The SmartConnect can be connected with up to 50' CAT5 or CAT6.
NOTE:
WaterCop systems WCACT1, WPMS, WPMSH, WCNM and WCNM2 units will
need an external power supply, ACA100 (sold separately).
Included in this box:
•
WaterCop SmartConnect device
•
Wall mount fasteners/anchors
•
Interconnect cable
•
Owner’s Manual
Read Instructions before any installation is attempted. All sections of this manual
should be read and completely understood.
How the System Works
The SmartConnect unit receives the valve status from the WaterCop AUX I/0 output.
The information goes to a cloud server and out to the SmartConnect App on your
smartphone or tablet. If a leak is detected, the SmartConnect App notifies you of the
potential issue. You can also open and close your WaterCop valve through the app for
complete control of your water supply. The app will also notify you if there’s a signal
loss from the SmartConnect to the cloud service which may indicate a loss of power
or a loss of Internet connection.
SmartConnect
OR
