WaterClinic LOTUS-75SS, Руководство пользователя

Страница: 19 / 48

ENG 17
Notes
• RO membrane water production volume
The water output volume of the RO membrane component is influenced
by inlet water pressure and water temperature. Your equipment’s
declared volume of 75GPD is tested under a net pressure of 0.5MPa
and inlet water temperature of 25C . If net pressure is less than 0.5MPa
or if the inlet water temperature is less than 25C, water output volume
of the RO membrane component will be less than 75GPD.
• Storage tank capacity
The storage tank on your equipment has a stated capacity of 3.1G.
However this figure is its theoretical capacity and its actual storage
capacity is about 70%-80% of the stated value, which is 2.0-2.5G.
• Disposal of old filters
After replacing old filters, they cannot be cleaned and reused; it is
recommended that you dispose of them with solid waste garbage.
Warnings:
• When any of the following situations occur, immediately disconnect
the water purifier water source (close the inlet water ball valve) and/or
the power source and carry out repairs.
- If the water purifier pipes or related components are leaking.
- If the water purifier and/or components stop working.
- If any components leak electricity.
- If there are any other anomalies or failures.
• When you go out or do not use the machine, disconnect the water
purifier's water source (close the inlet water ball valve) and/or power
source.
• If the water purifier parts are damaged, it is recommended that the water
purifier be entrusted to the manufacturer or distributor, service center,
or specialized technical personnel for replacement to prevent loss caused
by improperly performed maintenance, the manufacturer assumes
no liability for losses incurred as a result of operation or use that does
not conform with the instructions and reminders specified herein.