WaterClinic LOTUS-75SS, Руководство пользователя

Страница: 12 / 48

ENG 10
Pre-Installation Preparations
• Choose the location where the water purifier will be installed
• Confirm the availability of the various tools required
for installation
• Confirm that you have all the connectors required for installation
• Make sure to turn off the water supply and electricity before
commencing installation
Functions of Accessories
• Storage Tank: Used to store water filtered by the water purifier.
• High Pressure Pump: Boosts pressure to create a stable environment
for the RO membrane.
• Low Voltage Switch: Prevents pump idling. When the inlet water
pressure is less than 0.03 MPa or when the inlet water stops,
the low-voltage switch automatically shuts off the power source
so the machine comes to a halt.
• High-Voltage Switch: Prevents pump from overdrive. When the pressure
tank is full or has reached the set pressure level, power supply is
automatically cut off to stop the operation of the machine.
• Inlet Water Solenoid Valve: Connects or cuts off incoming water.
Operating pressure range is less than ≤0.6MPa.
• Check Valve: Also known as a one-way valve, controls the direction
of water flow.
• Auto Flush Solenoid Valve: Automatically flushes the reverse osmosis
membrane.
• Computer Control Box: Converts 220V AC to 24V DC (the machine’s
safe operating voltage).
Water Purifier Features
• Low Noise: This machine’s imported parts offer low noise,
few vibrations, long service life, operational quality and reliability;
• Automatic Control System: The system controls the whole water
production process, such as stopping automatically when there is no
inlet water or when the tank is full;
•
Auto Flush Function: The system can automatically control the water
auto flush process for the RO membrane to ensure more reliable
and safe operation.
Installation Methods
Our company recommends that your water purifier is installed by trained professionals as the installation process is somewhat complex and requires the
use of various tools. However, if you decide to install the purifier yourself, please refer to the following steps and diagrams:
Adjustable Spanner
Drill
6.2 mm Drilling Bit
Hole Saw
φ
14 mm
Phillips and Flathead Screwdrivers
Scissors
14 - 16 mm Wrench
19 - 21 mm Wrench
Needle Nose Pliers
1
1
1 (Waste water hole)
1 (High-speed steel or marble hole saw)
1 of each
1 pair
1
1
1